Yoke conversion

Home 2024 Forums Opening Section Maintenance Issues Yoke conversion

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #83383

    I want to convert my yoke in the 310C to a “ram” style yoke. Any experience with either changing to a later model 310’s yoke or using an aftermarket product? Any 337 required? STC’d conversions available?


    Go to http://www.avion.com
    You will find it there.


    I have had a few older 310’s in the shop that were converted to later model 310 or 340 yokes using a machined aluminum bushing to step the 1.25 inch yokes down to the older .75 shafts. I don’t recall seeing any specific paperwork for this but you may want to run it by your IA and/or local FSDO.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.