wingspan and length of a cessna 310Q

Home 2024 Forums Opening Section General Topics wingspan and length of a cessna 310Q

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #84935

    Can anybody help me out with the dimension’s of a 310Q, I’m in a dispute with the local airport authority over a hangar space promised to me and now they are trying to back out of based on I don’t have my twin yet to give it to another guy, the list to get a big hangar is over 5 years long and i anticipate having a twin by year end, I’ve been on the list for last 3 years and had an agreement with them that i would get one of the new hangars, anyway I am trying to prove my 210 is not much different size wise than a 310 Q from what i can tell wingspan is within an inch or two and I’m not sure about length but I think about 6 inches there and height about the same, could anyone help me out on this. thanks in advance.

    #104153

    36’11” wide x 29’7″ long

    #104168

    Are you talking T-hangar, or box? Best be sure the back of the tip tanks have clearance in the T. With my T310Q nose inside the front door by maybe two feet, I had about the same behind the tips and the top of the tail. Sorry, I don’t have the book anymore.

    ps My “new” TR182RG looks really small in my hangar 😯

    #104175
    quote RCLOVER:

    ps My “new” TR182RG looks really small in my hangar 😯

    How are you liking it, Rich?

    #104183
    quote TDUPUIS:

    quote RCLOVER:

    ps My “new” TR182RG looks really small in my hangar 😯

    How are you liking it, Rich?

    Missing the capability, big time. But the insurance went from $3300 to $1200. 13 gph at 145 KTAS will work. It’s a fun little ride 🙂

    #104196

    My 310Q POH says 36’11” W X 29’7″ L X 10′ 5″ H…….If you have a beacon installed on the tail, it adds 3″ of height to the tail.

    #104208

    The width of the tail is important too.

    #104230

    Didn’t think of that !! 🙂 my POH says 17’0″ for the tail width.

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.