JPI EDM 960 installation

Home 2024 Forums Opening Section General Topics JPI EDM 960 installation

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #83714

    Has anyone installed the JPI EDM 960 twin engine monitor on a pressurized Twin Cessna? We are trying to find an ideal place to mount the Data Acquisition Units and wanted to see what has worked for others.


    I recently purchased a 414 that has a 960 installed, below is a link to thread. I can look up who installed it if that helps.


    I installed a JPI960 in my 1980 421C. We installed the boxes under the floor. JPI was helpful with providing longer harnesses to reach from the engines to the under cabin floor locations. If you have RAM engines, make sure you get the green arc to 35 inches… 🙂

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.