C340 lower door snubber

Home 2024 Forums Opening Section Maintenance Issues C340 lower door snubber

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #83756

    I would like to add a door snubber to my 1975 C340. Is there a kit to do this or do I have to buy the brackets from Cessna? I can get my own cylinder if I can get the open and closed length, brackets and mounting location of the brackets.
    Thanks

    #95826

    If you are referring to the after-market snubber assembly that attached to the rear door frame and the bottom of the lower clam-shell, you can probably find one at one of the twin cessna salvage yards. Mine was installed in 1985 without a part number reference in the logbook. These assemblies may have been manufactured by AAR under STC SA2440SW ( Ref: STC). Perhaps one of the members has the documentation kit.

    Geoff

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.